Buying Guides

Compact Track Loader Sizes: Small, Medium and Large Frame Chart (2026)

Compact Track Loader Sizes: Small, Medium and Large Frame Chart (2026)

Compact track loader sizes are sorted the same way as skid steers: by rated operating capacity, or ROC, the load the machine is rated to carry in the bucket. A bigger ROC brings a heavier, wider machine, a taller hinge pin, more horsepower and more hydraulic flow. It also brings a bigger trailer and a bigger price. Pick the wrong size and you either fight the machine all day or pay to haul around weight you never use.

This guide gives you a CTL size chart for small, medium and large frames, with current models from Bobcat, John Deere, Cat, Kubota, Takeuchi, Case and JCB. Every figure comes from the manufacturer’s own spec page or PDF. After the chart: which size fits which job, what each size means for your trailer, and which sizes Pennsylvania dealers had for sale on Heavy Listing on November 19, 2026.

Compact track loader size chart: small, medium and large frame

No standard defines “small frame” or “large frame” for track loaders. Bobcat’s buyer’s guide talks about small, medium and large frame track loaders without giving numbers. The only maker we found that publishes cutoffs is Bobcat itself, on its CTL lineup page, where the filter sorts machines into 1,400 to 2,400 lb, 2,400 to 3,400 lb and 3,400 lb and up. We use those cutoffs here because they are published and they fit the other six brands well. Treat them as a convention, not a rule: a dealer down the road may call a 2,300 lb machine “mid-size.”

Frame sizeROC (35% of tipping load)Operating weightEngineWidth (standard tracks, no bucket)Height to hinge pin
Small frameUnder 2,400 lb (1,490 to 2,380 lb in current models)6,424 to 10,000 lb, most 7,400 to 9,100 lb55 to 90 hp, most 65 to 74 hp55 to 76.5 in, most 60 to 68 in109.5 to 126.7 in
Medium frame2,400 to 3,400 lb (2,400 to 3,200 lb in current models)8,560 to 12,300 lb71.6 to 111.3 hp, most at 74 hp65.9 to 80.7 inAbout 120 to 132 in
Large frame3,400 lb and up (3,459 to 4,520 lb)10,515 to 13,669 lb (Case TV620B: 16,300 lb with cab)92 to 122 hp76 to 81.8 in123 to 146.6 in

Ranges built from the manufacturer figures in the tables below. Cutoffs from the ROC filter on the Bobcat compact track loader lineup; they are a convention, not an SAE or ISO class. Mini track loaders (about 3 feet wide, around 1,000 lb ROC) are a separate class. JCB’s 3TS-8T telescopic loader is left out of the large-frame engine range.

Read the chart as bands with soft edges. A small compact track loader from one brand can be rated within a few pounds of a medium one from another. JCB’s 250T is rated at 2,429 lb on its product page and 2,317 lb in JCB’s own online store, so it sits in the medium or small class depending on which page you read.

ROC also hides how big a machine really is. Case’s TR340B is a 90 hp, 10,000 lb radial-lift machine, yet its ROC (2,380 lb) puts it in the small class. Takeuchi’s TL12R2 has 111 hp and lands in the medium class. Radial-lift machines often carry less at full height than vertical-lift machines of the same weight, so they rate lower. Size by ROC first, then look at weight and horsepower before you assume two machines are equal.

CTL sizes by brand: current lineups

Each brand’s current North American compact track loaders, sorted into the three classes. The number after each model is its ROC in pounds at 35% of tipping load, from the maker’s site or spec sheet.

BrandSmall (under 2,400 lb)Medium (2,400 to 3,400 lb)Large (3,400 lb and up)
BobcatT450 (1,490), T595 (2,100), T64-2 (2,300)T66-2 (2,400), T650 (2,500), T76-2 (2,900)T770 (3,475), T86-2 (3,925)
John Deere317 P-Tier / 317G (2,125)325 P-Tier / 325G (2,590), 331 P-Tier (3,150)333 P-Tier (3,850), 335 P-Tier (4,025)
Cat239D3 (1,530), 249D3 (1,740)255 (2,499), 265 (2,823)299D3 (3,480), 299D3 XE (3,560), 275 (4,156), 285 (4,461), 285 XE (4,520)
KubotaSVL65-2 (2,100)SVL75-3 (2,490), SVL97-2 (3,200)SVL97-3 (3,459), SVL110-3 (3,700)
TakeuchiTL6R (1,840), TL8R2 (2,115)TL10V2 (2,525), TL11R3 (2,735), TL12R2 (2,975)TL12V2 (4,110)
CaseTR270B (1,890), TR310B (2,170), TR340B (2,380)TV370B (2,590), TV450B (3,150)TV620B (4,340)
JCB215T (2,105)250T (2,429), 270T (2,723), 300T (3,000)400T (3,994), 3TS-8T Teleskid (3,695 retracted)

Sources: Bobcat CTL lineup; John Deere fleet sheet and model spec sheets; Cat compact track loader listing; Kubota SVL series; Takeuchi track loaders; Case compact track loaders (35% figures from the spec sheet PDFs); JCB compact track loaders and the JCB machine store (300T). Read November 19, 2026.

Every brand covers all three classes, but not evenly. Takeuchi and Case have one large machine each. Cat has five above 3,400 lb, including the new 275 and 285, which push the top of the large class past 4,400 lb. Deere’s line starts at 2,125 lb: it has no CTL as small as Bobcat’s T450 or Cat’s 239D3.

Watch Case’s numbers in particular. Its website headlines ROC at 50% of tipping load, the skid steer method, so the TV450B shows as 4,500 lb on the web and 3,150 lb at 35% in the spec sheet. Compare a Case to another brand at 35% or you will put it a full class too high.

Representative specs for each CTL size

The chart gives ranges. This table puts real machines side by side, so you can see how weight, width and hinge pin height climb with ROC.

ModelSizeROC (35%)Tipping loadOperating weightEngineWidthHinge pinLift
Bobcat T450Small1,490 lb4,257 lb6,424 lb55 hp55 in109.5 inRadial
Cat 249D3Small1,740 lb4,970 lb7,831 lb67.1 hp gross66 in118.2 inVertical
Takeuchi TL6RSmall1,840 lb5,270 lb7,485 lb65.2 hp60.2 in114.4 inRadial
Kubota SVL65-2Small2,100 lb6,000 lb8,135 lb68.3 hp gross65.2 in118.5 inVertical
John Deere 317GSmall2,125 lb6,070 lb8,423 lb65 hp gross65.1 in121.0 inVertical
Bobcat T650Medium2,500 lb7,143 lb8,980 lb74 hp72.9 in124 inVertical
John Deere 325GMedium2,590 lb7,400 lb9,500 lb74 hp gross71.5 in126.1 inVertical
Cat 265Medium2,823 lb8,066 lb10,492 lb74 hp gross75.8 in132 inVertical
Case TV450BMedium3,150 lb9,000 lb10,610 lb90 hp gross76.5 in131.6 inVertical
Bobcat T770Large3,475 lb9,929 lb10,515 lb92 hp78 in132 inVertical
John Deere 333 P-TierLarge3,850 lb11,000 lb12,183 lb108.5 hp gross80.7 in132 inVertical
Takeuchi TL12V2Large4,110 lb11,740 lb12,865 lb111.3 hp77.2 in129.9 inVertical
Cat 285Large4,461 lb12,745 lb13,497 lb111 hp gross81.8 in146.6 inVertical

Sources: Bobcat T450, T650, T770; Cat 249D3, 265, 285; Takeuchi TL6R and TL12V2; Kubota SVL series; John Deere 317G and 325G spec sheets and 333 P-Tier brochure; Case TV450B spec sheet. Bobcat and Takeuchi don’t say whether hp is gross or net. Weights are open cab or canopy where the maker lists both. Width is without a bucket on the standard track.

From the smallest machine here to the largest, ROC triples and weight more than doubles, from 6,424 lb to 13,497 lb. Width grows by more than two feet, and the hinge pin rises about three feet. Horsepower climbs too, but in a step rather than a line: most small and medium machines sit at 65 to 74 hp, then the large class jumps to 92 hp and above.

What the ROC on a track loader really means

Tipping load is the weight in the bucket that starts to lift the back of the machine. ROC is a safety margin below it. Bobcat’s buyer’s guide says ROC is typically 35% of tipping load on compact track loaders and 50% on skid steers. Bobcat’s figures come out at exactly 35%: the T770’s 9,929 lb tipping load times 0.35 gives its 3,475 lb ROC. Kubota’s and Takeuchi’s land within a few pounds of the same ratio. Takeuchi’s spec sheets cite SAE J818 at no more than 35%, and its website cites ISO 14397-1 at 35%.

  • Check which percentage you are reading. Cat and Deere print both the 35% and 50% figures. Case headlines 50% on the web. A spec that looks 40% bigger may just be the other method.
  • Counterweights move a machine up. Bobcat’s T770 goes from 3,475 lb to as much as 3,725 lb with counterweight kits. Deere rates the 335 P-Tier at 4,025 lb with one counterweight installed.
  • Telescopic arms change the number with reach. JCB’s 3TS-8T is rated at 3,695 lb with the boom retracted and 1,600 lb extended, according to JCB’s store page. Size a Teleskid by the reach you will actually use.

Don’t compare a CTL’s ROC straight against a skid steer’s. At the same ROC the track loader has a much higher tipping load. Our compact track loader vs skid steer comparison works through twin models, and our skid steer size chart covers the wheeled side.

What size compact track loader do I need?

Start with the heaviest load you handle every week, not once a year. A pallet of block, a full bucket of wet clay, a bale: weigh it, keep it under the ROC with room to spare, then check access, trailer and attachments.

Main workUsual sizeWhy
Residential landscaping, backyards, hardscapeSmallA 55 to 66 in machine gets through side yards, and lower weight is easier on finished lawns and driveways.
Farm and acreage work, fence lines, barn cleaningSmall or mediumEnough capacity for bales and feed, and still haulable behind a heavy pickup.
General site work, grading, utility backfillMediumCapacity for most material and attachments, with 74 hp and high flow as an option on most models.
Loading tandem dump trucks, heavy pallets, stoneLarge, vertical liftMore ROC, and hinge pins up to 147 in to clear high truck sides.
Forestry mulching, land clearing, cold planingLarge with high flowHungry attachments run best on the biggest circuits, and the 40+ gpm options and 100+ hp engines sit mostly in the large class.
Snow on big lotsMedium or largeWeight helps push, and a wider frame carries a wider pusher.

❌ Buying by horsepower. The Case TR340B has 90 hp and rates 2,380 lb. The Bobcat T650 has 74 hp and rates 2,500 lb.

❌ Sizing for the one big job. If you load trucks a few days a season, rent a large frame for those days and own the size that fits the rest of the year.

✅ Measuring the tightest spot before you shop. Gate, barn door, trailer deck. Write the width down.

✅ Stepping up one size when attachments are the plan. At the edge between two classes, the bigger frame usually brings more hydraulic flow and a steadier platform for heavy tools.

Small wheeled articulated loader, a Giant V452T with an orange and gray body, parked with its bucket lowered in a muddy field
Search “compact loader” and you also get machines like this Giant V452T, a small articulated wheel loader. A compact track loader is a different machine: skid steer arms and controls on a rubber track undercarriage. Photo: Pixabay.

Width and access: will it fit through the gate?

Track width sets the machine’s width, and most makers offer a wider track that adds a few inches. The bucket is usually wider still. Kubota’s SVL65-2 is 65.2 in wide on standard tracks and 68 in with its bucket. Bobcat’s T86-2 is 78 in, or 80 in with an attachment.

  • Small frames: Bobcat’s T450 is the narrowest current model we found, at 55 in. Takeuchi’s TL6R is 60.2 in, and most others in the class run 65 to 68 in.
  • Medium frames: 65.9 in (Cat 255 on 320 mm tracks, Kubota SVL75-3) to 80.7 in (Deere 331 P-Tier on 17.7 in tracks).
  • Large frames: 76 to 81.8 in. A large CTL needs an opening of nearly 7 feet before you count the bucket.

Deere’s 317G sheet shows how slippery this number can be: its dimension table gives 65.1 in on standard tracks, while its equipment list mentions a 68 in stance. Measure the machine you are buying, tracks and bucket included, rather than trusting a brochure figure.

Green tape measure with the yellow blade pulled out to about 8 inches, on a white background
Measure the opening, not the gate: posts and latches eat inches. Then compare it with the machine’s width on its tracks and with the bucket. Photo: Pixabay.

Weight and transport: the size you can actually haul

Width is never the transport problem with a CTL. The widest current model is 81.8 in, well under Pennsylvania’s 8 ft 6 in legal width. Weight is the problem, and it climbs fast. A small frame at 6,400 to 9,000 lb fits on a common equipment trailer behind a heavy-duty pickup. A large frame at 12,000 to 13,700 lb, plus a bucket, an attachment and the trailer, is a gooseneck or a truck job.

  • Tie-downs: machinery of 10,000 lb or more needs at least four tie-downs under 49 CFR 393.130. That catches every large CTL in this guide and most of the medium class too: the Cat 265, Case TV450B, Deere 331 P-Tier and Kubota SVL97-2 are all over 10,000 lb.
  • CDL: in commerce, a combination rated at 26,001 lb or more that tows a trailer rated over 10,000 lb needs a Class A CDL (49 CFR 383.91). A trailer that carries a 12,000 lb machine is rated over 10,000 lb, so check the truck and trailer ratings together.

Our guide to hauling heavy equipment in Pennsylvania covers trailers, permits and costs, and our breakdown of how much a compact track loader weighs goes model by model, with cab, tracks and attachments added.

Hydraulic flow, ground pressure and price by size

Size also decides what you can run on the front. Standard auxiliary flow is 16.7 to 24.2 gpm across the whole range, so a bucket, forks or an auger work on any size. High flow is where the classes split:

  • Small: some spec sheets list no high-flow option at all (Bobcat T450, Takeuchi TL6R, Deere 317). Where it is offered, it runs 26 to 37.6 gpm.
  • Medium: about 27 to 40.5 gpm.
  • Large: 32 to 45 gpm. Deere’s 333 and 335 P-Tier list 44 gpm, Kubota’s SVL110-3 45 gpm, and Bobcat’s T86-2 adds a 42 gpm super flow option.

If a mulcher or cold planer is in the plan, read our guide to high flow vs standard flow before settling on a size.

Ground pressure does not climb with size. Bigger machines usually come on wider tracks, so the large Bobcat T770 is rated at 4.2 psi and the small T450 at 4.8 psi. Cat’s medium 255 on 320 mm tracks is 5.9 psi, and 4.7 psi on 400 mm tracks. If you work on soft ground or turf, choose the track width as carefully as the frame. Our article on compact track loader tracks explains the options.

New prices climb by class. Bobcat’s lineup page lists suggested starting prices of $64,245 for the small T450, $74,564 for the medium T650, $88,230 for the large T770 and $120,586 for the T86-2. Dealer prices vary, but the gap between classes is real.

What CTL sizes are for sale in Pennsylvania right now

On November 19, 2026, Pennsylvania dealers had 53 used compact track loaders with asking prices on Heavy Listing. We sorted them by the manufacturer’s ROC for that model, read from the official pages above, including Bobcat’s and Cat’s pages for older models such as the T550, T740, T870, 249D and 259D.

Eleven machines are older models whose specs we could not verify on a maker’s site (Bobcat T590, Kubota SVL90-2 and SVL95-2, Takeuchi TL8, TL140 and TL230, John Deere 323E, Case TR320 and TV380). We left those unclassified rather than guess.

SizeMachinesModels listedModel yearsAsking price rangeMedian asking price
Small12Cat 249D3 (2), 249D, 259D, 259D3; Takeuchi TL8R2 (2); Bobcat T550, T595; Deere 317G; Kubota SVL65-2; Case TR340B2015 to 2024$25,000 to $58,500$34,500
Medium14Bobcat T650 (4), T740 (2); Kubota SVL97-2 (3); Takeuchi TL10V2, TL12R2; Cat 289D3; Case TV450B; JCB 300T2015 to 2025$22,500 to $78,900$48,700
Large16Bobcat T770 (8), T870 (2); Deere 333G (4); JCB 3TS-8T (2)2015 to 2023$25,000 to $67,900$46,500
Not classified (older models)11See above2009 to 2018$22,500 to $42,500$29,500

Source: Heavy Listing, used compact track loaders listed by Pennsylvania dealers on November 19, 2026. ROC from the current or non-current model pages cited above; earlier model years with the same name can be rated slightly differently.

Yes, the medium median is higher than the large one. Two of the medium machines are 2025 Bobcat T650s with 60 hours, listed at $75,500 and $78,900; leave them out and the medium median drops to $47,700. What matters more is how far prices overlap between sizes. A 2015 Bobcat T770, a large frame with 2,665 hours, lists at $25,000, the same as a 2021 Takeuchi TL8R2, a small frame. A 2024 John Deere 317G with 400 hours asks $58,500, more than most large frames on the list.

On the used market, year and hours move the price more than frame size. If your budget says small but the work says large, an older large frame may be the better buy. Inspect it hard, starting with the undercarriage. Our used compact track loader prices analysis breaks down how age, hours and brand set the price.

Compact track loaders listed by Pennsylvania dealers right now:

Find your size in stock

Every listing shows year, hours and asking price. Look the model up in the brand table above to see its size, then contact the dealer directly.

Browse used compact track loaders in Pennsylvania →

Buying used: size-specific things to check

  • Confirm the ROC for that exact model and year. Names carry over between generations, and counterweights or a different track change the rating. The decal on the machine and the operator’s manual are the final word.
  • Large frames work harder. High-flow mulching and truck loading are hard on hydraulics, drive motors and pins. Ask what attachments it ran, not only how many hours it has.
  • Small frames often lived in rental fleets and landscaping crews. Look for worn tracks, sprockets and quick-attach plates.
  • Check what the high-flow option actually is. A large frame without high flow will not run a mulcher, whatever its size.
  • Price the undercarriage. Tracks, rollers and idlers cost more on a large machine, and a worn set changes what the machine is worth.

Our used skid steer and CTL inspection checklist walks through each of these on the lot.

The bottom line on compact track loader sizes

If you remember one thing about compact track loader sizes, make it the 35% ROC: under 2,400 lb is a small frame, 2,400 to 3,400 lb is medium, above that is large. Read every brand’s spec at that percentage, then hold the machine up against your narrowest gate, your trailer rating and the attachment you most want to run. For most contractors that lands on a medium frame of 8,500 to 12,300 lb and 66 to 81 in wide. Go small when access or a pickup-sized trailer decides everything. Go large for truck loading, heavy pallets and high-flow tools, and plan the trailer, tie-downs and license that come with it. On the used lots in Pennsylvania this month, a 2015 large frame and a 2021 small frame were listed at the same $25,000, so let the work pick the size and let year and hours pick the price.

FAQ

What are the sizes of compact track loaders?

Track loaders are usually grouped by rated operating capacity at 35% of tipping load: small frame under 2,400 lb, medium frame from 2,400 to 3,400 lb, and large frame from 3,400 lb up to about 4,500 lb. Mini track loaders, about 3 feet wide and rated around 1,000 lb, are a separate class. The cutoffs are a convention; Bobcat publishes them in its lineup filter, and no standard defines them.

What is a mid-size compact track loader?

A medium or mid-size CTL is rated at roughly 2,400 to 3,400 lb. Current examples include the Bobcat T650 and T76-2, John Deere 325 P-Tier, Cat 255 and 265, Kubota SVL75-3, Takeuchi TL10V2, Case TV370B and JCB 270T. Most weigh 8,500 to 11,000 lb and run 74 hp.

What is the smallest compact track loader?

Among current full-size models, Bobcat’s T450 is the smallest at 1,490 lb ROC, 6,424 lb and 55 in wide. Cat’s 239D3 (1,530 lb ROC) and Takeuchi’s TL6R (1,840 lb ROC, 60.2 in wide) are close behind. Below them sit stand-on and mini track loaders such as Bobcat’s MT100, which are a different class.

What is the biggest compact track loader?

By ROC, Cat’s 285 XE at 4,520 lb, followed by the Cat 285 (4,461 lb), Case TV620B (4,340 lb) and Cat 275 (4,156 lb). By weight, the Case TV620B is the heaviest at 16,300 lb with a closed cab.

How wide is a compact track loader?

Current small frames run from 55 in (Bobcat T450) to about 68 in on standard tracks, medium frames about 66 to 81 in, and large frames 76 to 82 in. Wider track options and the bucket add a few inches.

Is a bigger track loader always better?

No. A larger frame lifts more and runs bigger attachments, but it costs more, needs a heavier trailer and four tie-downs, and may not fit through gates or onto finished lawns. Buy the size that fits most of your work.

Keep reading

Find your next machine

Used equipment from Pennsylvania dealers and an up-to-date auction calendar. Contact sellers directly, no buyer fees.