Buying Guides

Tracked Skid Steer: Compact Track Loader or Over-the-Tire Tracks?

Tracked Skid Steer: Compact Track Loader or Over-the-Tire Tracks?

Search for a tracked skid steer and you will find two different machines under the same name. One is a compact track loader (CTL): skid steer lift arms on an undercarriage built for rubber tracks. The other is a regular wheeled skid steer with over-the-tire (OTT) tracks bolted over its tires. Both are sold as “skid steer with tracks”, and they are not the same purchase.

This guide explains how the two are built, what the tracks change in flotation, speed and wear, what each costs to buy and keep, and how Pennsylvania dealers list them. If you are still choosing between wheels and tracks in general, start with our skid steer vs compact track loader comparison. This article picks up where that one stops: once you want tracks, which kind?

Two machines sold as “tracked skid steer”

Compact track loader (CTL)Skid steer with OTT tracks
What it isA loader built around a rubber-track undercarriage: drive sprockets, idlers, rollers, track tensionerA wheeled skid steer with steel or rubber-padded tracks fitted over its tires
Can it run on tires?NoYes: take the tracks off
Published ground pressureYes, on most spec sheets (3.8 to 5.7 psi on Bobcat’s M-Series)Not published by the skid steer or OTT makers we checked
Capacity rating35% of tipping load50% of tipping load (it is still a skid steer)
Wear partsRubber tracks, sprockets, idlers, rollersTires, plus the track’s pins, links, pads and bolts
How it is listed“Compact track loader”, “CTL”, sometimes “track loader”Listed as a skid steer; the tracks show up in the description

Sources: Bobcat compact track loaders brochure (B-1859), Bobcat buyer’s guide for the 35% and 50% ratings, McLaren Industries over-the-tire tracks.

Most search traffic for “tracked skid loader” or “track skid loader” means the first machine. All 53 tracked machines Pennsylvania dealers had on Heavy Listing on November 19, 2026 were compact track loaders, and every one was titled that way. None of the 22 wheeled skid steers mentioned tracks in its title.

How a CTL is built differently

The lift arms, cab and quick-attach plate of a CTL look like a skid steer’s. Below the frame, the two machines have little in common.

On a wheeled skid steer, the drive motors turn the axles through chains. Bobcat’s spec sheet for the S650 describes “two chains per side” running in a “sealed chaincase with oil lubrication”. Four tires carry the machine.

A compact track loader has no chaincase. On each side, a drive sprocket turns a rubber track that runs around a front idler and over a row of rollers. Bobcat’s M-Series brochure lists the parts that matter to a buyer:

  • Rollers: 3 to 5 triple-flange rollers per side, depending on model (5 on the T740, T750 and T770).
  • Track tension: set with a grease cylinder, adjusted with “a common grease gun”.
  • Undercarriage mounting: solid-mounted as standard, with Roller Suspension optional on most models and standard on the T870.
  • Tracks: steel-reinforced rubber with internal steel cables.

Other brands differ in the details. Takeuchi, for example, lists “tucked-in motors, shielded lines and triple-flange rollers” on its TL8R2 page. The principle is the same across brands: the undercarriage is part of the machine’s design, and its condition is a big part of what a used CTL is worth. Our guide to compact track loader tracks covers track types and replacement in detail.

Takeuchi TB285 compact excavator on rubber tracks working in wet mud at the edge of a pond
A Takeuchi compact excavator on rubber tracks in wet ground by a pond. A CTL’s undercarriage uses the same kinds of parts, a sprocket, an idler, rollers and a rubber track, built into the loader’s frame. Photo: Pixabay.

Over-the-tire tracks: what you are actually buying

OTT tracks are sets of linked steel sections that wrap around both tires on each side of a skid steer. The skid steer’s own drive does the work. McLaren Industries, one of the main OTT makers, offers four lines that fit 10×16.5, 12×16.5 and, on some lines, 14×17.5 tires:

McLaren lineShoeMade for
Rubber OTTSteel with rubber padsTurf, asphalt, concrete, sidewalks, dirt and mud
Magnum OTTAll-steel shoesDeep mud, sand, demolition, recycling yards, rocky ground
Diamond OTTSteel, diamond bar surfaceMud, clay, loose rock, sand, snow and ice
Maximizer OTTSteel, lighter buildMud, clay, loose rock, sand, snow and ice

Sources: McLaren OTT product page and comparison sheet.

The installation manual is where you learn what OTT tracks ask of the machine under them. These rules come from McLaren’s user guide:

  • Clearance. The machine needs room between the tires and the frame for the tracks. McLaren tells owners to check clearance with a single track section first, and to add wheel spacers if needed.
  • Fit. Leave 1/2 to 3/4 in of space between the tire and the inside of the track. Tires that are snug in the tracks wear their sidewalls and fail early.
  • Slack. Keep 1 to 3 in of track slack, about 2 in being best. A track that is too tight “can damage the loader”.
  • Tires. No foam-filled or solid tires: debris caught between track and tire can damage the machine. The one flat-proof tire McLaren approves is its own Nu-Air.
  • Break-in. Expect to re-tension one to three times in the first 20 hours.
  • Sand. Sand wears pins, links and bolts faster than any other ground, and it shortens the life of rubber pads.

Mounting and removing the tracks takes a kit of clamps and sockets and a raised, locked boom. It is a job for the yard, not something you do between two jobs on the same day.

Flotation: what the ground pressure numbers say

Ground pressure is the machine’s weight divided by the area of track touching the ground. Lower means less sinking and less damage to turf. CTL makers publish it. Skid steer makers generally do not; Bobcat’s spec pages for the S590 and S770 have no ground pressure line. McLaren says its tracks give flotation in mud and sand but does not publish a psi figure for a skid steer on OTT tracks. So there is no official number to put next to a CTL, and anyone who quotes one for a tracked skid steer is estimating.

What the CTL figures do show is how much the track size matters. From Bobcat’s M-Series brochure, the generation behind most used Bobcat CTLs in Pennsylvania listings:

ModelOperating weightStandard trackGround pressureOptional trackGround pressure
Bobcat T4506,148 lb11.8 in4.7 psiNoneNone
Bobcat T5507,557 lb12.6 in4.9 psi15.75 in4.0 psi
Bobcat T5907,822 lb12.6 in5.1 psi15.75 in4.1 psi
Bobcat T6308,655 lb12.6 in5.3 psi17.7 in3.8 psi
Bobcat T6509,320 lb12.6 in5.7 psi17.7 in4.2 psi
Bobcat T74010,263 lb17.7 in4.1 psiNoneNone
Bobcat T77010,465 lb17.7 in4.2 psiNoneNone
Bobcat T87012,925 lb17.7 in4.9 psiNoneNone

Source: Bobcat compact track loaders brochure B-1859 (M-Series spec table). Current Bobcat pages list slightly different figures for some models, such as 10,515 lb for the T770 on its product page.

Two things stand out. First, the 10,465 lb T770 puts less pressure on the ground than the 7,822 lb T590 on standard tracks, because its tracks are wider and 9.6 in longer on the ground. Weight alone does not set ground pressure. Second, the same model can vary by 1.5 psi depending on the track it left the factory with. A T650 on 12.6 in tracks is at 5.7 psi; on 17.7 in tracks, 4.2 psi. When a listing says “T650”, ask which track width it has, and check that replacement tracks were the same width.

Bobcat’s brochure claims flotation can add “as much as two months of extra work per year”, a month earlier in spring and a month later in fall. That is a manufacturer claim, but in Pennsylvania, where spring thaw and fall rain shut down a lot of sitework, it is the reason most buyers pay extra for tracks.

Speed and ride

A skid steer on OTT tracks keeps its own drive, so its speed rating does not change. On pavement, though, the steel tracks set the pace: McLaren says its steel Diamond tracks must move slowly over concrete and other hard surfaces to avoid damage, and its steel crossbar tracks “can cause damage to hard surfaces”.

A CTL is built for its tracks. Two-speed models are close to wheeled machines in top speed, single-speed models are not:

ModelTypeSingle speedTwo-speed, high range
Bobcat S590Skid steer (current)7.3 mph11.7 mph
Bobcat T590CTL (M-Series)7.1 mph10.4 mph
Bobcat T770CTL (M-Series)6.6 mph10.7 mph
Bobcat T870CTL (M-Series)7.2 mph11.4 mph

Sources: Bobcat S590 page; Bobcat brochure B-1859.

For a used buyer, the lesson is to check whether a CTL has two-speed. A single-speed machine that tops out under 7 mph is fine on one site. It is slow if you move between ends of a farm or a big lot all day.

Ride is the other difference. A solid-mounted CTL undercarriage is stiff, which Bobcat says makes it “the best type of undercarriage for grading”. Roller suspension softens the ride on rough ground. On Bobcat’s sheet, it also lowers the rated capacity slightly on some models: a T770 with Roller Suspension is rated at 3,325 lb instead of 3,475 lb.

Wear and maintenance: where the money goes

Bobcat’s buyer’s guide sums up the maintenance difference: compact track loaders need “regular track tension checks, undercarriage cleaning and monitoring of components like idlers and sprockets”, while skid steers need “tire pressure checks and occasional puncture repairs”.

On a CTL, the undercarriage is the big wear item. Mud and rock packed into it wear rollers and sprockets, and turning hard on pavement wears the tracks. None of that is cheap to replace, and you cannot take the tracks off when you work on concrete.

On a skid steer with OTT tracks, the costs are split. You still wear tires, and McLaren will not cover tire damage. The tracks have their own wear parts: pins, links, carriage bolts and, on rubber OTTs, pads. McLaren sells sections and pads separately, so a worn set can be rebuilt instead of replaced.

Compact wheel loader on rubber tires climbing a loose sand pile with a full bucket
A compact wheel loader on tires pushing up a loose sand pile. Soft sand is where tires spin and dig in, and it is also the ground McLaren says wears OTT track parts fastest. Photo: Pixabay.

What each costs to buy

On November 19, 2026, Pennsylvania dealers on Heavy Listing had 53 used CTLs listed, from $22,500 to $78,900 with a median of $37,500. The 22 wheeled skid steers ranged from $12,500 to $52,900, with a median of $27,000. The CTL median is 39% higher. McLaren, which sells the alternative, says dedicated track loaders “often cost around 40 percent more” than a wheeled machine. Our listings land in the same place.

OTT tracks close most of that gap for less money. In a 2020 article, McLaren put a set of steel crossbar OTTs at around $2,000 and a set of rubber OTTs at “roughly $3,200 or more”. Those are 2020 prices from the maker. Get a current quote for your tire size before you plan around them. Even at several times that, a wheeled machine plus tracks costs less than the $10,500 gap between the two medians.

The cheaper option has limits. It is still a skid steer rated at 50% of tipping load, and every swap between tires and tracks is a job for the yard. Our analysis of used compact track loader prices breaks CTLs down by age, hours and brand, and our guide to the cheapest compact track loaders shows where the low end of the market sits.

When each one makes sense

McLaren offers a rule of thumb: if you work off-road “at least 50 percent or more of the time”, a dedicated track machine is the better choice; if you run on hard surfaces “70 percent or more of the time”, a wheeled skid steer is. Coming from a company that sells OTT tracks, that split is fair.

❌ Skid steer with OTT tracks is the wrong buy if:

  • You grade, clear land or do landscaping on soft ground most of the year.
  • You would have to swap tracks on and off every week.
  • You need finish grading on a stable, solid-mounted undercarriage.
  • Your skid steer runs foam-filled tires and you do not want to replace them.

✅ Skid steer with OTT tracks fits if:

  • You already own a wheeled skid steer and lose days to mud in spring and fall.
  • Most of your work is on pavement, gravel or a farm yard, with a muddy season.
  • You plow snow in winter and work in mud the rest of the year.
  • Your budget covers a skid steer but not a CTL.

✅ A compact track loader fits if:

  • You work on soft ground, slopes or finished turf more than half the year.
  • You run tracked-friendly attachments all day: mulchers, graders, tillers.
  • You want to pay for flotation once instead of swapping tracks.

How dealers list tracked machines

Search used listings by the dealer’s words, not yours. In Pennsylvania listings on Heavy Listing, tracked machines are titled “Compact Track Loader”. In the rest of the market you will also see CTL, track loader, rubber track loader and, for older Caterpillar models, multi terrain loader (Cat still sells undercarriage parts for “Compact Track & Multi Terrain Loaders”).

Watch out for “track loader” on its own. It can also mean a crawler loader with steel tracks, like the Cat 963, a much bigger machine with no skid steer lift arms. Check the photos and the model number.

The model number usually tells you whether a machine runs on tracks:

BrandTracked (CTL)Wheeled skid steer
BobcatT: T590, T650, T770S: S590, S650, S770
John Deere (G-Series)Odd numbers: 317G, 325G, 331G, 333GEven numbers: 318G, 320G, 324G, 330G, 332G
KubotaSVL: SVL65-2, SVL75-2, SVL97-2SSV: SSV65, SSV75
CASETR and TV: TR340B, TV450BSR and SV: SR210B, SV185B
New HollandC: C327, C337, C362L: L316, L328, L334
TakeuchiTL: TL8R2, TL10V2, TL12R2None in our listings

Sources: manufacturer spec pages and brochures for Bobcat, John Deere, Kubota, New Holland and Takeuchi; CASE B-Series brochures linked from casece.com.

Caterpillar CTLs in our listings carry model numbers ending in 9 (249D, 259D, 289D3). JCB adds a T for tracks, as on the 3TS-8T. For a model-by-model look at each brand, see our guide to compact track loader brands.

A wheeled skid steer sold with OTT tracks is listed as a skid steer. The tracks appear, if at all, in the description or the photos. If you want one, search skid steer listings and ask the dealer whether tracks are included, which brand and for what tire size.

What to check before you buy either one

On a used CTL:

  • Track width against the spec sheet, since it changes the ground pressure.
  • Cuts, missing lugs or exposed steel cables in the rubber tracks.
  • Sprocket teeth: hooked or pointed teeth mean wear.
  • Rollers and idlers: flat spots, leaks, play.
  • Track tension cylinder: grease leaking at the fitting, or a track that will not stay tight.
  • Two-speed or single-speed, and roller suspension or solid mount.

On a skid steer with OTT tracks:

  • Tire sidewalls: wear from tracks that were fitted too tight.
  • Foam-filled or solid tires: the wrong pairing for McLaren tracks.
  • Rub marks on fenders or the frame: a sign of tight clearance.
  • Track sections: stretched links, worn pins, loose carriage bolts, worn pads.
  • Whether the tracks are included in the price, and which tire size they fit.
  • The chaincase, as on any skid steer.

Our used skid steer and CTL inspection checklist covers the engine, hydraulics and lift arms for both.

Used compact track loaders for sale in Pennsylvania

Here are some of the track loaders Pennsylvania dealers have listed now. Of the 53 on November 19, 2026, the most common brands were Bobcat (20), Takeuchi (7) and Kubota (7). Among them was a 2018 Bobcat T590 at $29,500 and a 2023 Takeuchi TL8R2 at $29,900.

Ready for tracks?

Browse used compact track loaders from Pennsylvania dealers. Every listing shows year, hours, price and location, so you can check the model, track width and speed with the dealer before you drive out.

Browse compact track loaders →

Going the OTT route instead? Start with a wheeled machine: see used skid steers for sale, and check the tire size before you price tracks.

FAQ

Is a tracked skid steer the same as a compact track loader?

Usually, yes. Dealers and manufacturers call it a compact track loader (CTL): skid steer lift arms on a rubber-track undercarriage with sprockets, idlers and rollers. A wheeled skid steer with over-the-tire tracks is also sometimes called a tracked skid steer, but it is a different machine: the tracks come off and it is still rated as a skid steer.

Are over-the-tire tracks as good as a compact track loader?

Not for full-time soft-ground work. OTT tracks add traction and flotation to a wheeled skid steer, and McLaren says they handle about 90% of the jobs a CTL does. But neither the skid steer nor the OTT makers we checked publish ground pressure for that setup, the tracks need a clearance check and tension adjustments, and swapping them takes time. A CTL is the better fit if you work off pavement more than half the year.

How much do over-the-tire tracks cost?

In a 2020 article, McLaren Industries put steel crossbar OTT tracks at around $2,000 a set and rubber-pad tracks at roughly $3,200 or more. Prices depend on tire size and track type, so ask for a current quote.

What is the ground pressure of a tracked skid steer?

On Bobcat’s M-Series compact track loaders it ranges from 3.8 to 5.7 psi, depending on the model and track width. Wider tracks lower it: a T650 is 5.7 psi on 12.6 in tracks and 4.2 psi on 17.7 in tracks. Makers generally do not publish ground pressure for wheeled skid steers, with or without OTT tracks.

Can you put tracks on any skid steer?

Only if the machine has the clearance and the right tires. OTT tracks are made for common tire sizes such as 10×16.5, 12×16.5 and 14×17.5, the machine needs room between tires and frame, and McLaren says not to use them with foam-filled or solid tires. Check your model with the track maker first.

Are tracked skid steers slower than wheeled ones?

Often a little. Bobcat lists 11.7 mph in high range for the S590 skid steer and 10.4 to 11.4 mph for its two-speed M-Series CTLs. Single-speed CTLs top out around 6.6 to 7.3 mph. A skid steer on steel OTT tracks has to go slowly on pavement to avoid damaging it.

Keep reading

Find your next machine

Used equipment from Pennsylvania dealers and an up-to-date auction calendar. Contact sellers directly, no buyer fees.