Prices

The Cheapest Compact Track Loaders: Real PA Dealer Prices (2026)

The Cheapest Compact Track Loaders: Real PA Dealer Prices (2026)

The cheapest compact track loader you can buy from a Pennsylvania dealer today costs $22,500. Two machines share that price on Heavy Listing: a 2018 Bobcat T740 and a 2017 Kubota SVL95-2. Neither is a small, entry-level machine. Both are large-frame loaders with more than 3,000 hours on the meter. That is the pattern in the whole cheap end of the market: low price buys you hours and age, not a smaller machine. This guide goes through the 53 compact track loaders (CTLs) PA dealers had listed on November 19, 2026, shows where the cheap ones actually are, what you give up at each budget and where a low price turns into an expensive machine.

The 10 cheapest compact track loaders for sale in PA right now

These are the lowest asking prices among used CTLs listed by Pennsylvania dealers on Heavy Listing on November 19, 2026. Hours are what the dealer reports. The “hours a year” column divides the hours by the machine’s age, counting 2026 as the current year.

MachineHoursHours a yearAsking price
2017 Kubota SVL95-23,910About 430$22,500
2018 Bobcat T7403,008About 380$22,500
2013 Takeuchi TL2302,148About 165$24,500
2015 Kubota SVL90-22,897About 265$24,500
2017 Case TV3801,907About 210$24,500
2021 Takeuchi TL8R22,033About 405$25,000
2015 Bobcat T7702,665About 240$25,000
2015 John Deere 323E3,097About 280$27,500
2022 Caterpillar 249D32,382About 595$28,500
2022 Takeuchi TL10V22,357About 590$29,500

Source: Heavy Listing inventory, Pennsylvania dealers, November 19, 2026. Asking prices, not sale prices. Listings change daily: click through to check that a machine is still available.

Just above that list, at $29,500 and $29,900, sit a 2021 John Deere 333G with 1,785 hours, a 2018 Bobcat T590, a 2023 Takeuchi TL8R2, a 2015 Bobcat T650 and a 2009 Takeuchi TL140. Those 15 machines are the entire sub-$30,000 market for tracked loaders from PA dealers on the site that day.

Twelve of the 15 come from one dealer, Kurtz Trading in Littlestown, which stocks an older, higher-hour mix. If you want the cheapest track loader in the state, that is the first inventory to look at. For the full price spread by year, hours and brand, see our breakdown of used compact track loader prices. This article stays on the cheap end.

Cheap doesn’t mean small: the bargain is in big, older machines

Most people looking for the cheapest track loader assume they will end up with a small frame. The listings say otherwise. Of the 15 CTLs under $30,000, 7 are large-frame models: the Bobcat T740 and T770, Kubota SVL90-2 and SVL95-2, Case TV380, Takeuchi TL10V2 and John Deere 333G.

A dealer prices a used machine mostly on age and hours. Frame size moves the price, but a 2015 big machine with 2,665 hours competes on price with a 2018 small one, not with a 2021 big one. So at the same money, you often get to choose between a smaller, newer machine and a bigger, older one.

Look at what $29,500 buys in this inventory, using the current specs each maker publishes for the model:

Listing at $29,500HoursRated operating capacity (ROC)Engine
2018 Bobcat T5902,7342,100 lb66 hp
2022 Takeuchi TL10V22,3572,525 lb74.3 hp
2021 John Deere 333G1,7853,700 lb (base machine, at 35% of tipping load)100 gross hp

Sources: Bobcat T590 specs, Takeuchi TL10V-2, John Deere 333G spec sheet (PDF). Current published specs; earlier model years can differ slightly.

Same asking price, and the Deere is rated to carry about 1,600 lb more than the Bobcat. That doesn’t make the 333G the right buy for everyone. A big frame weighs more, needs a heavier trailer and won’t fit through a backyard gate. But if you need capacity and your trailer can take it, the cheapest way to get it is an older large frame, not a newer mid-size. Our guide to compact track loader sizes sets out the frame classes.

What you give up at each price

Here is the same inventory cut by budget, with the tradeoff you make at each level:

Asking priceMachinesTypical model yearTypical hoursWhat you give up
Under $30,000152017 (2009 to 2023)About 2,400Age, hours or both. The 2021 to 2023 units here have worked 350 to 630 hours a year.
$30,000 to $39,999162018 to 2019About 2,300Mostly hours: at least 5 of 16 have 3,000 or more. Still mostly 2014 to 2021 machines.
$40,000 to $54,999112021About 1,960Little: none has 3,000 hours. You pay for a younger large frame.
$55,000 and up112023About 900Nothing on condition. You pay close to new money for low hours.

Source: Heavy Listing inventory, 53 CTLs from Pennsylvania dealers, November 19, 2026. “Typical” is the median. The hours median leaves out one 2023 Bobcat T770 whose reading is being confirmed with the dealer.

Read the table from the top. Under $30,000 you choose between an old machine with ordinary use and a young one that worked hard. Our study of how many hours is a lot on heavy equipment found the typical used track loader runs about 280 hours a year. The 2022 Cat 249D3 and the 2022 Takeuchi TL10V2 have run roughly twice that. Neither is a reason to walk away. It means the machine probably worked full time for a contractor or a fleet, and the undercarriage has done that work too.

The jump from the first band to the second buys less than you would expect: the median hours barely change. The real step is at $40,000, where machines with 3,000+ hours disappear and the typical model year jumps to 2021. If your budget can reach the low $40,000s, that is where the value curve turns.

Which brands and models show up cheapest

Brand alone doesn’t set a used price, but in this inventory some names cluster at the cheap end:

BrandCTLs listedCheapest listingUnder $30,000
Takeuchi72013 TL230, $24,5005
Bobcat202018 T740, $22,5004
Kubota72017 SVL95-2, $22,5002
John Deere62015 323E, $27,5002
Caterpillar62022 249D3, $28,5001
Case42017 TV380, $24,5001
JCB32022 300T, $54,9000

Source: Heavy Listing inventory, Pennsylvania dealers, November 19, 2026.

  • Takeuchi is where the cheap late-model machines are. The youngest CTL under $30,000 is a 2023 TL8R2 at $29,900, and a 2021 TL8R2 at $25,000 and the 2022 TL10V2 at $29,500 are close behind. Takeuchi lists the current TL8R-2 at 2,115 lb ROC and 74.3 hp on its spec page.
  • Bobcat has the most listings, so it has both the cheapest machine and some of the most expensive. Four Bobcats are under $30,000, including the 2015 T770 at $25,000.
  • Kubota splits in two: a 2017 SVL95-2 and a 2015 SVL90-2 at $22,500 and $24,500, and SVL97-2s from 2023 and 2024 at $49,500 and up.
  • JCB had nothing cheap. All three listings are 2021 and 2022 machines with 800 hours or less.

Before you buy a brand for its price, check two things the asking price doesn’t show: whether a dealer for that brand is close enough to get parts the same week, and whether your attachments and trailer suit the machine. Our comparison of compact track loader brands covers dealer networks and lineups.

Older white and red Takeuchi TB175 compact excavator with worn paint and rubber tracks, parked on a dirt pile with the boom and bucket lowered
Takeuchi machines show up often at the cheap end of the used market. This one is a TB175 compact excavator, not a track loader, but the scuffs, faded paint and rubber undercarriage are what an older budget machine looks like. Photo: Pixabay.

New list price vs. the cheapest used machines

Bobcat is the one maker in this group that publishes a suggested list price for its track loaders. On November 19, 2026, its site showed these starting prices for base models in the U.S., before freight, dealer prep, taxes, options and attachments:

Bobcat modelStarting list price (new, base)Cheapest used listing in our data
T595$66,5282017 T595, 1,699 hours: $34,500
T650$74,5642015 T650, 2,400 hours: $29,900
T770$88,2302015 T770, 2,665 hours: $25,000

Sources: Bobcat T595, T650 and T770 pages, suggested list price for base models. Final sale prices are set by dealers and are often different. Heavy Listing inventory for the used prices.

A well-used T770 sells for under a third of the starting list price of a new one. Older large frames lose value fast, and that is exactly why they are the bargain.

Nearly new machines are a different story. The two 2025 T650s with 60 hours are listed at $75,500 and $78,900, right around the new base list price. They may carry options the base model doesn’t, so compare spec for spec, and ask a Bobcat dealer what a new one with the same options costs out the door before you pay that money for a used one.

See every track loader under your budget

Sort the CTLs from Pennsylvania dealers by price, check the year and hours, and contact the dealer directly. No buyer’s premium on top.

Browse used compact track loaders →

The traps of a cheap track loader

A low asking price is only cheap if the machine doesn’t need $10,000 of work in its first season. On a CTL, the money hides in four places.

1. Tracks and undercarriage

A track loader’s rubber tracks, rollers, idlers and sprockets wear out on their own schedule, and the owner pays for them. On a machine with 2,000 to 4,000 hours, assume the undercarriage is part of the deal. Look for cracks across the lugs, steel cords showing through the rubber, hooked sprocket teeth and rollers that leak or don’t turn. Then ask the dealer what a set of tracks costs for that exact model and take it off your number if the tracks are near the end. Our guide to compact track loader tracks covers wear limits and replacement.

Close-up of the rubber track, rollers and drive sprocket area on a red and white Takeuchi TB290 compact excavator parked on gravel
Rubber track and rollers on a Takeuchi TB290 compact excavator. A track loader’s undercarriage works the same way, and on a high-hour machine it is the first place to look. Photo: Pixabay.

2. Hours you can’t verify

A low reading on an old machine needs an explanation. The 2009 Takeuchi TL140 in our data shows 1,300 hours, about 75 a year for 17 years. That may be true: farm machines and private owners can run that little. But a replaced meter or instrument cluster gives the same reading. Ask for service records, and compare the pedals, seat, pins and bucket edge against the hours.

3. Hard hours on a young machine

The cheap 2021 to 2023 units above worked 350 to 630 hours a year. Full-time work is fine on a well-maintained machine, but ask who ran it, on what ground and whether the tracks have been replaced already.

4. Missing options

Two machines of the same model can be very different: enclosed cab with heat and air or open ROPS, standard or high flow hydraulics, two-speed travel or one. The cheapest listing is often the base spec. High flow only matters if you run a mulcher, cold planer or similar attachment. The Bobcat T770, for example, delivers 23 gpm on standard flow and 36.6 gpm with the high-flow option, according to Bobcat’s spec page. If you need it, a cheap machine without it is the wrong machine.

Example (using two listings from our data):

❌ Wrong: “The T740 at $22,500 is the cheapest, so it is the best deal.”

✅ Right: “The T740 has 3,008 hours. If it needs tracks soon, it costs me more than the $24,500 Case TV380 with 1,907 hours. I’ll ask both dealers for track photos and the last service date before I decide.”

Go through our used skid steer and CTL inspection checklist before you agree on a price. It applies to every machine above.

When a wheeled skid steer is the cheaper answer

If the cheapest track loader is still too much, look at what you actually need the tracks for. On the same day, Pennsylvania dealers had 21 wheeled skid steers available on Heavy Listing with a median asking price of $26,500, against $37,500 for CTLs. Eight of those skid steers were listed below $22,500, the price of the cheapest CTL.

Be careful with the very cheap ones: several are 2001 to 2006 machines, and a 2015 New Holland L220 at $12,500 shows 9,813 hours. The useful comparison is between twins. Bobcat sells the S650 on wheels and the T650 on tracks:

At $37,500 the wheeled S650 has 422 hours. The tracked T650s are a 2015 with 2,400 hours for $29,900, or a 2017 with 1,800 hours for $47,900: $10,400 more and still about four times the hours. Tires are also cheaper to replace than a track undercarriage.

Tracks earn their price on mud, soft soil, sand, slopes and snow, and on finish grading where you don’t want to tear up the ground. On concrete, asphalt and compacted gravel, wheels wear less and cost less. Lift numbers aren’t directly comparable either: Bobcat’s buyer’s guide notes that rated operating capacity is typically 50% of tipping load for a skid steer and 35% for a CTL. Our skid steer vs compact track loader comparison works through the choice with spec sheets, and our used skid steer prices show the wheeled market in detail.

How to buy a cheap CTL without regretting it

  • ✓ Decide the frame size first, from your trailer, your access and your heaviest load. Then look for the cheapest machine in that size, not the cheapest machine overall.
  • ✓ Divide the hours by the age. Around 280 a year is typical; well above 450 is a machine that worked full time.
  • ✓ Ask for close-up photos of both tracks, the sprockets and the rollers before you drive to see it.
  • ✓ Get a price for a set of tracks for that model and keep it in your budget.
  • ✓ Ask what the listing includes: cab, heat and air, high flow, two-speed, bucket.
  • ✓ Run it cold, or ask for a cold-start video, and check the hours against the wear you see.
  • ✓ Comparing with an auction result? Add the buyer’s premium and Pennsylvania sales tax to the hammer price first, and remember you can’t run it before you bid.
  • ☐ If the budget is fixed, compare the cheapest CTL with a newer wheeled skid steer at the same money.

Compact track loaders for sale in Pennsylvania

The newest track loader listings on Heavy Listing, straight from the dealers:

The bottom line on the cheapest compact track loaders

The cheapest compact track loaders from Pennsylvania dealers start at $22,500, and there were 15 under $30,000 on November 19, 2026. Most of them are older large frames with 2,000 to 4,000 hours, plus a handful of young Takeuchis and a Cat that worked hard. That is a good deal for a buyer who needs capacity and is ready to budget for tracks. It is a poor deal for a buyer who needs a machine that runs every day without surprises and can’t afford a new undercarriage. The best value point in this inventory sits in the low $40,000s, where the 3,000-hour machines drop out. And if you don’t need tracks, a wheeled skid steer gets you a newer machine for the same money.

Find the cheapest track loader that fits your work

Compare year, hours and price on every used CTL from Pennsylvania dealers, then call the dealer directly.

See track loaders for sale →

FAQ

What is the cheapest compact track loader?

On November 19, 2026, the cheapest used compact track loaders from Pennsylvania dealers on Heavy Listing were a 2018 Bobcat T740 with 3,008 hours and a 2017 Kubota SVL95-2 with 3,910 hours, both listed at $22,500. Fifteen of the 53 CTLs were under $30,000.

How much does a cheap track loader cost?

Expect $22,500 to $30,000 for the cheapest used CTLs from dealers. At that price most machines are 2013 to 2018 models with about 2,000 to 3,900 hours. A few 2021 to 2023 machines also fall in that range because they have worked 350 to 630 hours a year.

What is the compact track loader price for a new machine?

It depends on the brand and options, and most makers don’t publish it. Bobcat does: on November 19, 2026 its site listed starting prices of $66,528 for the T595, $74,564 for the T650 and $88,230 for the T770, for base models before freight, dealer prep, taxes and options.

How much is a skid steer with tracks?

A “skid steer with tracks” is a compact track loader. Used ones from Pennsylvania dealers ran from $22,500 to $78,900 on November 19, 2026, with a median of $37,500. Wheeled skid steers had a median of $26,500.

Which brand of track loader is cheapest used?

In our data, Takeuchi had the most low-priced listings: 5 of its 7 CTLs were under $30,000, including the youngest machines in that range. Bobcat and Kubota had the two cheapest individual machines. Age and hours matter more than the badge, so compare those first.

Is a cheap high-hour track loader worth buying?

It can be, if the price leaves room for tracks and the machine checks out. Ask for track and sprocket photos, service records and a cold start. A $22,500 machine that needs a new undercarriage can end up costing more than a $25,000 one that doesn’t.

Keep reading

Find your next machine

Used equipment from Pennsylvania dealers and an up-to-date auction calendar. Contact sellers directly, no buyer fees.